How do I use Clara?

1 / Ensure your skin has been cleansed and is free of makeup or other skincare products.
2 / Hold the power/suction strength button for 4 seconds to turn the device on.
3 / Using the mode selection button, select hot compress mode before extraction to dilate and stretch the pores, so that blackheads/ debris are softened for easier extraction. The device itself will get hot in compression mode, hence please do not run on this mode for longer than 30 minutes each session.
4 / Gently glide the compression plate across your entire face and neck. Be careful not to leave the device while on the hot treatment option in one position for too long on your skin, in order to avoid a rash or burn.
5 / Press and hold the power/suction strength button to shut off the device when done with hot compression.
6 / Attach the rubber ring around the middle of the suction base and insert the foam filter inside. The rubber rings are to fasten the tips in place onto the device, and the foam bits act as the filter between the device and your face to absorb the blackheads and prevent blackheads from getting trapped in the device.
7 / Attach any microdermabrasion or suction tip to the suction base. Click here to learn how to choose the right tip.
8 /  We recommend starting from the smallest tip, and working your way up with repeated treatments. Click here to learn how to remove blackheads.
9 / While exfoliating and decongesting your pores, choose one of the three LED settings for added benefits. Click here to learn how to choose the LED therapy.
10 / After extraction, use the mode selection button to select cold compress mode to shrink and tighten your pores as well as reduce redness.
11 / Clean the device and parts before storing away in a cool, dry place.